Pysense 2.0X

home Introduction

done Pycom Helium Miner
done Pycom Products
done Getting Started
done Tutorials & Examples
done Firmware & API Reference
done Product Info, Datasheets
- done Development Modules
- done OEM Modules
- done Shields
  - done Pygate
  - done Pysense
  - done Pysense 2.0 X
  - done Pytrack
  - done Pytrack 2.0 X
  - done Pyscan
  - done Expansion Board 2.0
  - done Expansion Board 3.0
  - done Deepsleep
  - done PyEthernet
- done Helium Hotspot Miner
- done Pynode+
- done Accessories
- done Notes
done Update Firmware
done Pybytes
done Cellular Services
done Pylife
done Pymesh
done Micropython Support
done Advanced topics
done License

Ask on the forum

Getting started

Find the libraries for the Pysense 2.0 X in the Pycom libraries repository on Github.

Download the files and extract them into the project folder in Pymakr

Click the upload project to device button. This will store all necessary files on the device and allow you to import them in the example main.py.

Check the REPL. If you have Pybytes activated, the example will send the sensor data to Pybytes automatically.

Examples

The Pysense has several examples:

Pinout

The PyPort connector is for a 6 lead mini ribbon cable, part: Amphenol 20021511-00006T4LF. The external IO header power pins are labelled as follows

3V3AUX - The power provided by the development module

3V3AUX_LP - the power provided by the development module for the SD card (This can be switched off)

3V3 - The power provided by the Pysense 2, for the USB-Serial converter.

The Pysense 2 can be powered through the USB port, the battery connector and the VUSB_AUX header just below the PyPort. Connecting a 5V supply to the header will result in exactly the same behaviour as powering it through the USB connector.

The pinout of the Pysense is available as a PDF File

Notes

Battery Charger

The board features a single cell Li-Ion/Li-Po charger with a JST PHR‑2 connector. When the board is being powered via the micro USB connector, it will charge the battery (if connected).

Make sure you check the polarity of the battery before plugging it in! Connect the positive side to the side marked with a +.

Mechanical Dimensions

3D model for case design

Please see the 3D model (Step format)