The drawings for the G01 are available as a PDF File
The G01 is certified for:
The pinout of the G01 is available as a PDF File
The drawings for the G01 is available as a PDF File
Please note that the PIN assignments for UART1 (TX1/RX1), SPI (CLK, MOSI, MISO) and I2C (SDA, SCL) are defaults and can be changed via software.
The AT commands for the Sequans Monarch modem on the G01 are available in a PDF file.
Tutorials on the G01 module can be found in the examples section of this documentation.